A STOCK S001 watch came into Ross Watch Repairs because it was ticking in one place rather than advancing normally. The customer chose a Mini Service, and our inspection revealed a small but important component was missing: the battery insulator.
We cleaned the movement and fitted a new insulator to restore the required separation between the battery contact and surrounding metal components. The agreed work was completed within an hour. This case shows why a quartz watch that is not working correctly needs an assessment, rather than an assumption that the battery alone is responsible.

The Fault: A Watch That Ticked but Did Not Advance
The customer’s description was straightforward: the watch was not keeping time, although the hand appeared to tick on the spot. That visible movement did not mean the watch was operating normally.
For this STOCK S001, the customer opted for our Mini Service. On inspection, we found that the battery insulator was absent. We could not establish why it was missing, so we did not assume when it had disappeared or who was responsible.
What Does a Watch Battery Insulator Do?
A battery insulator is a non-conductive component that keeps electrical contacts separated from metal surfaces they should not touch. It may look insignificant, but where the movement design requires it, it has an important electrical function.
Without the required insulation, a battery contact can touch another conductive component, such as the metal underside of a dial. Depending on the movement’s construction, that unintended contact can create a short circuit and interfere with operation.
The American Watchmakers-Clockmakers Institute’s guidance on the battery well explains that a required insulator needs to be clean and correctly positioned to prevent a short to ground. It also highlights the importance of clean, sound electrical contacts.
An electrical insulator is different from a caseback gasket: the insulator separates conductive parts, while the gasket serves a sealing function. One cannot replace the other.
A Missing Component We See in the Workshop
Missing battery insulators are an issue we encounter regularly across quartz-watch repairs. That is an observation from our workshop—not a claim that every STOCK S001 has this fault, or that every watch ticking in one place needs an insulator.
The important point is to inspect the actual movement and its fitting. A replacement battery alone would not restore a missing insulating component.

STOCK S001 Mini Service: Movement Cleaning and Insulator Replacement
For this repair, the work focused on cleaning the existing movement and fitting the missing battery insulator. Restoring the insulating component addressed the unwanted-contact issue rather than leaving the watch assembled without a part it required.
This was a Mini Service to the existing mechanism, not a movement-replacement case. The small missing component was an important part of the repair, even though it cannot be seen when the watch is closed.
The work was completed within one hour. That turnaround applies to this particular STOCK S001. Other watches may need more investigation, additional parts or different work, so we confirm the likely timescale after assessment.

Does Your Quartz Watch Tick Without Keeping Time?
A hand twitching in place is a symptom, not a diagnosis. Have the watch assessed before deciding whether it needs battery work, a Mini Service or a more extensive repair. Avoid trying to move the hands manually or improvising an insulator from household materials.
For a similar fault, contact Ross Watch Repairs for a free assessment. You can also compare our watch battery replacement services in London and read about our Mini Service.
Visit Ross Watch Repairs or Send Your Watch by Post
London Bridge / The Shard
Ross Watch Repairs
Unit 306, The Shard Retail Arcade
London Bridge Street
London SE1 9BZ
Canary Wharf
Ross Watch Repairs
Unit 4B, Cabot Place Shopping Centre
Canary Wharf, London E14 4QT
No appointment is needed for an initial assessment. We explain the recommended work and estimate before you decide, with payment on completion. See directions to our London Bridge branch or Canary Wharf branch.
For UK postal repairs, send the watch to the Canary Wharf address above using Royal Mail Special Delivery with appropriate cover. Include your name, telephone number, email address, return address and a note describing the fault or work required. A £15 postage and packaging charge applies to postal repairs under £50, assessment returns and warranty returns.
Frequently Asked Questions
Why was this STOCK S001 ticking in one place?
The customer reported the symptom, and our inspection found a missing battery insulator. We cleaned the movement and fitted the required insulator. The same symptom on another watch still needs its own diagnosis.
Can a missing battery insulator stop a watch working properly?
Yes. Where the design requires insulation, its absence can allow electrical contacts to touch metal surfaces they should not, creating an unintended electrical path. The appropriate insulating component must be correctly fitted.
How long did this STOCK watch repair take?
The Mini Service, including movement cleaning and fitting a new battery insulator, was completed within one hour. Other repairs are assessed individually.
Ross Watch Repairs is an independent watch repair business and is not affiliated with or endorsed by STOCK Watches.











