A replica Rolex-style Datejust can look convincing from the outside, but what is holding the movement in place inside the case? A customer sent a copy Rolex to Ross Watch Repairs after noticing that the dial appeared to rattle and move when the crown was used to change the time.
On opening the case, we found that the mechanical movement was sitting in a cheap, thin, cut-out plastic ring rather than a properly engineered, securely fitted movement holder. We showed the customer what we had found and explained why a watch’s external appearance cannot guarantee the standard of the components or assembly inside. To help illustrate the difference in construction, we also photographed the movement retention arrangement inside a separate, genuine Tudor automatic watch.
Inspection at a glance
Watch Replica Rolex Datejust-style watch with a blue dial
Problem Dial rattled and moved when setting the time
Found Movement sitting in a cheap, thin, cut-out plastic ring
Compared Genuine Tudor – movement secured to a fitted metal holder with screws
Next step Full inspection of the dial and movement fit before any repair
01 · The problem
Why Was the Dial Moving When the Time Was Changed?
The customer reported movement or rattling around the dial while adjusting the time. That should not be dismissed as normal simply because a watch is a replica. The movement, dial and crown assembly must all be supported sufficiently for the hands and setting mechanism to operate correctly.
There are several possible explanations for a dial that appears loose, including damaged or poorly fitted dial feet, inadequate dial attachment or movement shifting inside the case. Those faults are not identical: the dial is attached to the movement, while the movement itself needs to sit securely within the case. A loose movement may make the entire assembly shift, whereas a dial can also move relative to a firmly fitted movement.

Our finding In this case, the thin plastic movement holder was an obvious point of concern when we opened the watch. The images document that arrangement, but they do not by themselves prove whether the dial feet were also loose or damaged. Any actual repair recommendation should follow a full inspection of the fit.
02 · What we found
What We Found Inside This Replica Rolex
After removing the caseback, we could see the automatic movement sitting within the larger watch case, surrounded by a thin, light-coloured plastic ring. This was not a substantial, purpose-designed movement-retaining system: it was a cheap cut-out spacer. On a mechanical watch like this, the movement needs to be properly anchored within the case so that it cannot shift when the crown is used to set the time.


The separate photograph of the plastic ring makes the arrangement especially easy to understand. From the polished bracelet and blue dial, an owner may assume the interior is built to the same standard as its outward appearance. Opening this particular watch showed why that assumption can be misleading.
There is a big difference between a properly engineered plastic movement holder and a cheap cut-out ring. Plastic movement holders are commonly used in quartz watches, where they can be specially shaped and designed to secure the movement correctly. Some mechanical watches also use purpose-built non-metallic holders, but they must be properly designed and fitted. This replica’s thin, cut-out ring was not that kind of secure mounting arrangement. For a mechanical movement, we would expect proper movement retention rather than a flimsy spacer that allows the assembly to move when setting the time.
03 · The comparison
Replica Rolex vs Genuine Tudor: Looking at Movement Security
For comparison, we have included a workshop photograph of the movement inside a genuine Tudor automatic watch. It is a different watch, not a genuine version of the replica Datejust, so this should be understood as an illustrative comparison of movement retention rather than a like-for-like test of identical calibres.

This replica
Movement sitting in a cheap, thin, cut-out plastic ring rather than a securely fitted holder.
Genuine Tudor
Movement secured to a fitted metal movement holder with screws, and the holder secured within the case.
The Tudor photograph shows a more substantial arrangement: the automatic movement is secured to a fitted metal movement holder with screws, and the holder is secured within the case. This contrasts sharply with the replica’s thin, cut-out plastic ring. The important point is not that every mechanical watch must use metal, but that its movement must be firmly and correctly retained.
Tudor is an appropriate historical comparison because it was established by Hans Wilsdorf, the founder of Rolex. Tudor’s official history explains the original relationship between the two brands, although they are separate brands and their different watch models do not all use the same movement-mounting design.
04 · Why it matters
Why the Internal Build Quality of a Replica Matters
On a watch where the movement or dial is inadequately secured, the movement may shift during time-setting or daily wear. Depending on the actual fault, this can place unwanted stress on components such as the winding stem, crown, dial feet or hands. A watch may initially keep time while still having mechanical fitting problems inside.
Replica and so-called “superclone” watches vary considerably. Some are better assembled than others, and an expensive replica does not necessarily guarantee a well-fitted movement or reliable after-sales parts supply. Equally, it would be wrong to say that every replica uses the same thin spacer or will develop this problem.
Good to know The lesson for owners is simple: do not judge a replica watch entirely by how convincing it looks. The exterior finish, dial printing and bracelet may appear impressive while the internal construction is much less consistent.
Advice
What Should You Do If a Replica Rolex Dial Moves?
What to do
- Stop forcing the crown. If the dial or movement seems to shift when setting the time, repeated adjustment could worsen an underlying fitting problem.
- Have the movement and dial attachment inspected. A watchmaker can determine whether the dial feet, movement clamps, retaining ring or crown-stem assembly are involved.
- Ask what a realistic repair can achieve. A component may be repairable or adjustable, but unavailable parts and differences between replica versions can limit the options.
- Do not assume water resistance. We would not advise using a replica watch in water, even if the dial or case carries a high water-resistance marking.
Our approach is to explain the condition of the individual watch and provide an estimate before any agreed repair work. We do not promise a replica will become equivalent to a genuine Rolex after servicing.
Free assessment
Dial moving on your replica or superclone?
Bring your watch to The Shard or Canary Wharf, or send it to us by post. We assess watches free of charge and confirm the cost before any work begins.
Visit or post
Can Ross Watch Repairs Repair Replica Rolex Watches?
We assess many types of replica and superclone watches and explain whether a repair is practical. Depending on the exact movement and condition, options may include investigation of loose dials, crowns, stems, movement retention, replacement parts or servicing. An assessment does not guarantee the required parts will be available or that every fault can be corrected.
For more information, see our replica Rolex and superclone watch repair guide, watch servicing and watch part repairs.
The Shard / London Bridge
Ross Watch Repairs, 306 The Shard Retail Arcade, London Bridge St, London SE1 9BZ.
Canary Wharf
Ross Watch Repairs, Unit 4B, Cabot Place Shopping Centre, Canary Wharf, London E14 4QT.
Postal repairs Customers throughout the UK can also use our postal watch repair service. Send your watch to the Canary Wharf address by Royal Mail Special Delivery, including your name, telephone number, email address, return address and a note describing the fault or work required. Assessment is free and payment is on completion. A £15 postage and packaging charge applies to postal repairs under £50, assessment returns and warranty returns.
FAQs
Frequently Asked Questions
Why does the dial move on my replica Rolex when I set the time?
Possible causes include a loose dial attachment, damaged dial feet or a movement that is not properly retained in its case. A watchmaker needs to inspect the individual watch to establish which part is moving.
Are plastic movement holders suitable for mechanical watches?
Plastic holders are common in quartz watches, where purpose-made holders can secure the movement properly. Some mechanical movements can also use engineered non-metallic holders, but a cheap, thin cut-out ring is not a suitable substitute for secure movement retention. In this replica Rolex-style watch, that poorly supported fit was the concern.
Are all replica Rolex watches built to the same standard?
No. Construction, component quality, fit and parts availability can vary significantly between watches and manufacturers, even when their exteriors look similar.
Will servicing make a replica as reliable as a genuine Rolex?
Servicing may address specific faults, but it cannot guarantee identical construction, quality control, water resistance or long-term parts support.
Can I post a replica Rolex to Ross Watch Repairs for an assessment?
Yes, contact us with the fault details and photos, then send the watch using Royal Mail Special Delivery to our Canary Wharf workshop when advised. Include your contact details and a written description of the problem.












