A Rolex Oyster Perpetual Date reference 115200 came into Ross Watch Repairs because the bracelet clasp was no longer locking correctly. The watch was still wearable, but the clasp had lost its proper shape and the bracelet also showed heavy surface scratching from regular use.
Rather than replacing the clasp, we were able to reshape and correct the existing clasp, repair the damaged spring bars and give the case and bracelet a full cosmetic polish. The work was completed the same day within a couple of hours.
Repair at a glance
Watch Rolex Oyster Perpetual Date 115200
Problem Clasp no longer locking correctly; heavy surface scratching
Work Original clasp reshaped, damaged spring bars repaired, full cosmetic polish
Time Same day, within a couple of hours

01 · The fault
The Fault: Rolex Clasp Would Not Lock Properly
The main reason for the booking was the clasp. It would not close and lock as it should, which meant the bracelet could not be relied on to stay securely fastened.
A clasp fault does not always mean a new clasp is required. Depending on the condition and where the distortion is, it can sometimes be reshaped and adjusted so the original component can continue to be used.

02 · The clasp
Reshaping the Original Rolex Clasp

After inspection, we were able to work with the original clasp rather than replacing it. The clasp was carefully reshaped and adjusted until it closed and locked correctly again.
This type of repair needs to be done conservatively. The aim is to restore the locking action without unnecessarily changing the shape or finish of the original clasp.
03 · Spring bars
Damaged Spring Bars Repaired
During the bracelet work we also found that the spring bars were damaged. These small components are important because they help secure the bracelet to the case.
We were able to repair and correct the damaged fittings so the bracelet could be refitted securely.

04 · Polishing
Removing the Majority of Surface Scratches

The bracelet and clasp had accumulated a large number of everyday scratches. We carried out a full cosmetic polish using a light, controlled refinishing process.
The aim was not to aggressively remove metal or chase every deep mark. Instead, we removed the majority of visible surface scratching while keeping the original lines and shape of the case, bracelet and clasp as intact as possible.
Work carried out
- Inspection The clasp was not locking and the spring bars were found to be damaged.
- Original clasp reshaped Carefully adjusted until it closed and locked correctly again.
- Spring bars repaired Fittings corrected so the bracelet could be refitted securely.
- Controlled polish The majority of surface scratches removed while preserving the original lines.
05 · The result
Same-Day Rolex Clasp and Bracelet Repair
The clasp reshape, spring-bar work and polishing were completed the same day within a couple of hours. The clasp was locking correctly again and the bracelet and case had a much cleaner overall appearance.

Free assessment
Clasp not locking or bracelet scratched?
Bring your watch to The Shard or Canary Wharf, or send it to us by post. We assess watches free of charge and confirm the cost before any work begins.
Visit or post
Rolex Bracelet and Clasp Repairs in London
Ross Watch Repairs can assess Rolex watch repairs including clasp faults, bracelet repairs, spring bars, polishing, crown and stem work, servicing and other mechanical issues.
Where possible, we will always assess whether an existing component can be repaired before recommending replacement. See our watch part repairs page for more information.
You can visit our London workshops or use our UK postal watch repair service if you are not local.
The Shard / London Bridge
Ross Watch Repairs, 306 The Shard Retail Arcade, London Bridge St, London SE1 9BZ.
Canary Wharf
Ross Watch Repairs, Unit 4B, Cabot Place Shopping Centre, Canary Wharf, London E14 4QT.
FAQs
Frequently Asked Questions
Can a Rolex clasp be repaired if it no longer locks?
Sometimes. If the clasp is distorted rather than badly broken, it may be possible to reshape and adjust the original component. This Rolex 115200 clasp was successfully corrected without replacing it.
Can damaged Rolex spring bars be repaired?
It depends on the damage. The spring bars on this watch were damaged, but we were able to correct the fittings and refit the bracelet securely.
Can you remove all scratches from a Rolex bracelet?
Not always, and removing every deep mark can require taking away too much material. On this watch we used a controlled polish that removed the majority of surface scratches while preserving the original shape and finish as much as possible.
How long did this Rolex 115200 repair take?
The clasp reshape, spring-bar repair and cosmetic polishing were completed the same day within a couple of hours. Other jobs may take longer depending on condition and parts requirements.
Get in touch
Get a Free Rolex Clasp or Bracelet Assessment
If your Rolex clasp will not lock, the bracelet feels insecure or the case and bracelet need refinishing, contact Ross Watch Repairs for a free assessment.
Ross Watch Repairs is an independent watch repair company and is not affiliated with, authorised by or endorsed by Rolex.











